|
|
|
|
| |
 |
| |
Wiring harness is routed under the steering column shaft inside of the vehicle. The tag is located near the center area of the harness that is routed the length of the steering column. |
|
| |
 |
| |
This latex ink dry transfer is a perfect reproduction of the original used by Chrysler. They are basically a “portable” stamping and do not require baking or other difficult application procedures. Transfer time takes about 15 seconds! Complete instructions included. |
|
| |
 |
| |
Our custom carpets are manufactured just like the original. The 80/20 loop is plush and thick just like it was meant to be. Every carpet has 5” of excess material to guarantee a surplus for custom trim and fit. The tow pads are patterned after original samples and are positioned and attached just like the ones from the factory. Best of all they are shipped flat – NEVER ROLLED! This guarantees the carpet will arrive in crisp detailed form. Installation time is decreased up to a couple hours due to the “flat shipping”. No more heating and waiting for the carpet to take shape. This is the best available carpet on the market. |
|
| |
 |
| |
ECS has worked with a major manufacturer to come up with the most correct package trays on the market. These items incorporate the correct 18 hole, 9 row configuration. For vehicles that require the rear speaker option, they also have the correct grain pattern that was used on the original Chrysler version. ECS offers all three correct grain styles to meet every requirement. |
|
| |
 |
| |
This key tag was used for all new vehicles that were shipped by rail to their various destinations. It was used to identify each vehicle concerning its row and location on the rail carrier. An authentic factory correct detail! |
|
| |
 |
| |
This decal is located on the inside of the glove box door and informed the owner that the car was not intended for highway or general passenger car use. |
|
| |
 |
| |
This instruction card came from the dealer and hung from the directional turn signal lever located on the steering column. |
|
| |
 |
| |
Decal is located on the pull handle of the carb/choke cable. The handle attaches to the underside of the lower dash area (For “Fresh Air” equipped vehicles). |
|
| |
 |
| |
This decal is located above the headlight switch on the front face of the instrument panel. |
|
| |
 |
| |
This decal was located on the flat top area of the radiator core support. |
|
|
